Skip to content

4.8 on GoogleNo intermediaries

Taps and sanitaryware in Murcia and Alicante

Dripping taps, cisterns that will not stop and leaking sanitaryware: I leave them closed and usable, with parts that fit your installation.

I work as a self-employed plumber: personal attention, the same professional and reasonable prices. I leave a clear quote before I start.

Fitting a mixer tap on a ceramic basin with copper tails

How I diagnose the problem

I check the model and the connection: mixer, crossheads, cartridge, thread or a concealed cistern. I test whether a washer is enough or whether the body is pitted by scale. On sanitaryware I check the seat, the seal, the bolts and the waste outlet. I do not buy a new tap until I know it fits your install.

What you get when you call

Stop the drip

A tap that will not close wastes water and stains the ceramic.

A cistern that shuts

Mechanism, seal or fill valve: I fix the failing point, not the whole tank if it is unnecessary.

Sanitaryware that sits true

A pan, bidet or basin that rocks or leaks at the base.

The right part

I measure the connection and tap type before buying or fitting.

Repairs I usually do

Tap cartridge or washer

A dripping spout or a stiff lever. I clean the scale or change the cartridge; if the body is damaged, I replace the tap.

Cistern mechanism

The water never stops or the tank will not fill. I change the float, seal or flush valve without touching the pan if it is unnecessary.

Pan seat and seal

The pan rocks or stains at the base. I remake the seal, tighten the bolts and check it stays dry.

Sanitaryware change

I replace a basin or pan while keeping existing connections when I can, so I do not open extra tiles.

Process

I check the model and connection

Thread, cartridge, mixer or crossheads; parts are not all the same.

Repair or replace

Sometimes a washer is enough; other times the body is pitted and must go.

Fitting and tightness

I close, open and check there is no leak at the spout or below.

Normal use again

The room works as it should, with no drip or half-empty cistern.

What changes the quote

Repair or replace

A washer is not the same price as a new mixer. I give you both options when both will work.

Who supplies the part

You can buy the tap or I can bring it. The “from” price is labour; the part is added if I supply it.

A concealed cistern

If there is an access panel, I work through it. If not, opening the wall is quoted separately.

Hours and travel

The “from” price is daytime in the usual area. Night work or a run outside that round is confirmed first.

Typical situations

Kitchen and basin

A stiff mixer, a dripping spout or a shower that will not mix.

A running cistern

The water never stops and the fill noise is constant.

Sanitaryware change

Replacing a pan or basin while keeping existing connections when possible.

FAQ

I can fit one you buy or suggest a compatible model. What matters is that it matches your connection.

Yes, if there is an access panel. If not, I tell you what can be done without breaking the wall at random.

If this matches your fault, ask for a visit or a quote.

Request a quote

Where I offer this service

I handle this fault in Cartagena, Torrevieja, Orihuela Costa and the rest of the coverage. Open the town if you want to see how the work looks there.